2N IP intercom User Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 100/198
5.3.9 Card Reader
This menu is available in the , and models only. 2N IP Base
®
2N IP Vario
®
2N IP Force
®
For only the option to limit unsuccessful access attempts is configured 2N IP Verso
®
here. Other card reader options can be configured in the menu.Extenders
The card reader helps you control access to your building effectively using contactless
RFID cards. The supported card types depend on the card reader model used.
The and card readers are equipped with an input/output 2N IP Vario
®
2N IP Force
®
Wiegand interface. The interface direction is configurable. In the input mode, the
interface can be used for connection of external card readers, fingerprint readers,
biometric data readers and so on. In the output mode, the interface helps connect the
intercom to the security exchange, e.g. and send IDs of the cards tapped on the
internal reader to this exchange.
Basic Settings

2N IP intercom Specifications

General

Tamper Switch	Yes
Dimensions	Varies by model
Weight	Varies by model
Connectivity	Wi-Fi
Power Supply	12V DC
Operating Temperature	60°C
Protocols	SIP, ONVIF
Interfaces	Ethernet
Keypad	Optional
Card Reader	Optional
Display	Yes (selected models)