2N IP intercom User Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 126/198
2N ® Indoor Touch Tab
This tab contains settings for connection of the devices the 2N Indoor Touch
®
intercom. The main parameter is the access key, which secures the connection and
enables you to create multiple independent groups of intercoms and 2N Indoor
®
devices within the local network. It also contains the video transmission Touch
settings.
Access key – set the access key to be shared by the intercom and 2N Indoor
®
. If the access keys do not match in the intercom and 2N® Indoor Touch, Touch
the intercom cannot call the device and the 2N Indoor Touch
®
2N Indoor Touch
®
device cannot receive video from the intercom. Each intercom can be assigned
up to three access keys and thus become a member of up to three independent
groups. The Access key length is up to 63 characters.2N Indoor Touch
®
Video resolution – s et the resolution of the video stream to be sent to
. 2N Indoor Touch
®
Video framerate – s et the framerate of the video stream to be sent to
. 2N Indoor Touch
®
Video quality – s et the quality of the MJPEG video stream to be sent to
. 2N Indoor Touch
®

2N IP intercom Specifications

General

Tamper Switch	Yes
Dimensions	Varies by model
Weight	Varies by model
Connectivity	Wi-Fi
Power Supply	12V DC
Operating Temperature	60°C
Protocols	SIP, ONVIF
Interfaces	Ethernet
Keypad	Optional
Card Reader	Optional
Display	Yes (selected models)