5.5.7 Maintenance
Use this menu to maintain your intercom configuration and firmware. You can back up
and reset all parameters, update firmware and/or reset default settings here.
Restore configuration – reset configuration from the preceding backup. Press
the button to display a dialogue window for you to select and upload the
configuration file to the intercom. You can also choose before uploading
whether the network parameters and SIP exchange connection settings from the
configuration file shall be applied.
Backup configuration – back up the complete current configuration of your
intercom. Press the button to download the configuration file to your PC.
Caution
Treat the file cautiously as the intercom configuration may include
delicate information such as user phone numbers and access codes.
Reset configuration – reset default values for all of the intercom parameters
except for the network settings. Use the respective jumper or push to Reset
reset all the intercom parameters; refer to the Installation Manual of your
intercom.
To Next Page
Loading...
Need help?
General
