Wiegand Module Configuration
The Wiegand module is equipped with the input and output Wiegand interfaces,
which are mutually independent, have separate settings and can receive and send
codes at the same time. The Wiegand input helps you connect such equipment as
RFID card readers, biometric readers and so on. With the Wiegand output, you can
connect the intercom to the security system in your building, for example (to send IDs
of the RFID cards tapped on the RFID reader or codes received on any Wiegand
input). The is also equipped with one logical input and one 2N
®
Wiegand Isolator
logical output, which can be controlled via Automation .
To Next Page
Loading...
