– set the FTP server username. The parameter is mandatory if the FTP Username
server requires user authentication.
– set a password for the above mentioned FTP server user.Password
– select the passive transmission mode (as web browser).Passive mode
Remote dir ectory – set the FTP server directory to which the camera images
shall be saved.
– set the image resolution.Picture resolution
– set automatic picture sending to the FTP server at the call Upload pictures
start or after a preset time period. You can disable automatic sending
(Automation) and send pictures via .Action.UploadSnapshotToFtp
– set the picture sending period in steps (10 seconds to 30 Upload period
minutes) when is set to .Upload pictures Periodic
To Next Page
Loading...
