2N IP intercom User Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 107/198
Note
The extending modules are displayed in the order corresponding to their
interconnection. The modules connected further from the basic unit are
listed below. If more modules of the same type are connected to one
intercom, it may be difficult to assign a setting to a particular module. In
this case, identify the modules connected using the Locate Module
button. The module will flash shortly several times when you press the
button.
Caution
Module Name has to be unique.
Main Unit Module Configuration

2N IP intercom Specifications

General

Tamper Switch	Yes
Dimensions	Varies by model
Weight	Varies by model
Connectivity	Wi-Fi
Power Supply	12V DC
Operating Temperature	60°C
Protocols	SIP, ONVIF
Interfaces	Ethernet
Keypad	Optional
Card Reader	Optional
Display	Yes (selected models)