2N IP intercom User Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 141/198
5.4.4 E-Mail
To inform the intercom users on all missed and/or successfully completed calls,
configure to send an e-mail after every call to the called user. You can 2N IP intercom
compile the e-mail subject and message text of your own. If your intercom is equipped
with a camera, you can automatically attach one or more snapshots taken during the
call or ringing.
The intercom sends e-mails to all the users whose valid e-mail addresses are included
in the users list. If the parameter in the user list is empty, e-mails are sent to the E-Mail
default e-mail address.
You can also send e-mails via Automation using the action.Action.SendEmail
Note
The E-mail function is available with the Gold or Enhanced Integration
licence only.
List of Parameters
SMTP
SMTP service enabled – enable/disable sending e-mails from the intercom.

2N IP intercom Specifications

General

Tamper Switch	Yes
Dimensions	Varies by model
Weight	Varies by model
Connectivity	Wi-Fi
Power Supply	12V DC
Operating Temperature	60°C
Protocols	SIP, ONVIF
Interfaces	Ethernet
Keypad	Optional
Card Reader	Optional
Display	Yes (selected models)