2N IP intercom User Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 104/198
5.3.10 Digital Inputs
In this configuration section set the parameters associated with digital inputs and their
interconnections with other intercom functions. The digital inputs are available in
selected intercom models or where appropriate equipment is installed ( /2N IP Vario
®
model card readers, e.g.).2N IP Force
®
List of Parameters
– define one (or none) of the logical inputs for secured state Assigned input
detection. The secured state is then signalled by a LED on the intercom, whose
location may vary in different intercom types.
– set the active input mode (polarity).Input mode

2N IP intercom Specifications

General

Tamper Switch	Yes
Dimensions	Varies by model
Weight	Varies by model
Connectivity	Wi-Fi
Power Supply	12V DC
Operating Temperature	60°C
Protocols	SIP, ONVIF
Interfaces	Ethernet
Keypad	Optional
Card Reader	Optional
Display	Yes (selected models)