2N IP intercom User Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 183/198
Address retrieval mode – select whether the TFTP/HTTP server address shall be
entered manually or a value retrieved automatically from the DHCP server using
Option 66 shall be used.
Server address – enter the TFTP ( ), HTTP ( ) or tftp://ip_address http://ip_address
HTTPS ( ) server address manually.https://ip_address
DHCP (Option 66/150) address – check the server address retrieved via the
DHCP Option 66 or 150.
File path – set the firmware/configuration filename directory or prefix on the
server. The intercom expects the XhipY_firmware.bin, XhipY-common.xml and
XhipY-MACADDR.xml files, where X is the prefix specified herein and Y specifies
the intercom model.
Use authenticatio n – enable authentication for HTTP server access.
– enter the user name for server authentication.Username
– enter the password for server authentication.Password
At boot time – enable check and, if possible, update execution upon every
intercom start.
Update period – set the update period: hourly, daily, weekly and monthly.

2N IP intercom Specifications

General

Tamper Switch	Yes
Dimensions	Varies by model
Weight	Varies by model
Connectivity	Wi-Fi
Power Supply	12V DC
Operating Temperature	60°C
Protocols	SIP, ONVIF
Interfaces	Ethernet
Keypad	Optional
Card Reader	Optional
Display	Yes (selected models)