2N IP intercom User Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 77/198
5.3.4 Camera
This menu is only available in the models that are equipped with an 2N IP intercom
internal camera or can be connected to an external camera. The camera signal can be
streamed directly into the call via a videophone, sent by E-mail, streamed via ONVIF
/RTSP to another device (a video surveillance device, e.g.), or simply HTTP
downloaded from the intercom in the JPEG format.
The following video signal sources can be used:
an internal integrated camera or external analogue camera (2N IP Video Kit
®
only)
a standard external IP camera supporting RTSP stream with codecs MJPEG (640
x 480 max resolution) or H.264 (640 x 480 Base Line Profile max resolution).
The recommended framerate is 15 frames per second in either case. Higher
frame rates may result in undesired effects (less smooth playing).
The menu helps you set such camera parameters as brightness, colour Camera
saturation and external IP camera login data if necessary. Refer to the Services /
and menus for the video call/streaming Phone, Services Streaming / Services E-Mail /
parameters.

2N IP intercom Specifications

General

Tamper Switch	Yes
Dimensions	Varies by model
Weight	Varies by model
Connectivity	Wi-Fi
Power Supply	12V DC
Operating Temperature	60°C
Protocols	SIP, ONVIF
Interfaces	Ethernet
Keypad	Optional
Card Reader	Optional
Display	Yes (selected models)