2N IP intercom User Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 182/198
3.
4.
5.
6.
sf – 2N
®
IP Safety
ak – 2N
®
IP Audio Kit
vk – IP Video Kit2N
®
ve – IP Verso2N
®
MACADDR is the MAC address of the intercom in the 00-00-00-00-00-00 format.
Find the MAC address on the intercom production plate or in the tab Intercom Status
via the web interface.
Example:
IP Vario2N
®
with MAC address 00-87-12-AA-00-11 downloads the following files from
the TFTP server:
hipv-firmware.bin
hipv-common.xml
hipv-00-87-12-aa-00-11.xml
Configuration
Use the tab to set automatic configuration download from the server Configuration
defined by you. The intercom periodically downloads a file from the server and gets
reconfigured without getting restarted.
Note
A few seconds' interruption of the display function occurs in the display-
equipped models during reconfiguration. Therefore, we 2N IP Vario
®
recommend you to update when the intercom traffic is very low (at
night, e.g.).
List of Parameters
Firmware update enabled – enable automatic firmware/configuration updating
from the TFTP/HTTP server.

2N IP intercom Specifications

General

Tamper Switch	Yes
Dimensions	Varies by model
Weight	Varies by model
Connectivity	Wi-Fi
Power Supply	12V DC
Operating Temperature	60°C
Protocols	SIP, ONVIF
Interfaces	Ethernet
Keypad	Optional
Card Reader	Optional
Display	Yes (selected models)