Update at – set the update time in the HH:MM format for periodical updating at a
low-traffic time. The parameter is not applied if the update period is set to a
value shorter than 1 day.
Next update at – set the next update time.
Last update at – last update time .
Update result – last update result. The following options are available:
Result Description
Invalid server
address
The server address is invalid.
Unsupported
protocol
The protocol is not supported. HTTP(s) and TFTP are supported only.
Invalid file path The provisioning file location is invalid.
DHCP option 66
failed
The server address loading via DHCP Option 66 or 150 has failed.
Invalid domain
name
The server domain name is invalid due to wrong configuration or
unavailability of the DNS server.
Server not found The requested HTTP/TFTP server fails to reply.
Authentication
failed
The HTTP credentials are invalid.
File not found The file has not been found on the server.
Request waiting in
queue...
The provisioning request is queuing...
In progress... Update is in progress.
To Next Page
Loading...
Need help?
General
