activated, use the parameter in the menu (Associated Switch Hardware Card Reader/
, , models) or the parameter in the 2N IP Base, Vario
®
Force Safety Associated Switch
menu of the card reader module ( model).Hardware Modules/ 2N IP Verso
®
Use the menu to assign the quick dial users. By default, button 1 is Hardware / Buttons
assigned to position 1 in the user list, button 2 to position 2 in the phone book, etc.
You can change the user and button settings as necessary. Most of the 2N IP intercoms
are equipped with one or more quick dial buttons. Refer to the Installation Manual of
your intercom model for the quick dial button count and extending options.
The Search in directory function works as a fulltext search in position numbers, user
names, phone numbers and e-mail addresses. The match is found in all the positions.
Every record in the Users list includes the following parameters:
– mandatory parameter for easier user search, for example.Name
– user e-mail address for sending missed call information. You can enter E-mail
more e-mail addresses separated with commas.
Photo – load the user photo. Click the photo adding frame to display the Photo
editor to load a photo from a file or create a user photo using an integrated
camera. The supported photo formats are .jpg, .png and .bmp. This function is
only available in display-equipped models: and 2N IP Verso
®
2N IP Vario
®
.
To Next Page
Loading...
Need help?
General
