show copper-ports cable-length 109
show copper-ports
cable-length
The show copper-ports cable-length Privileged EXEC mode command
displays the estimated copper cable length attached to a port.
Syntax
show copper-ports cable-length [interface]
Parameters
■ interface — A valid Ethernet port. Elana
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The port must be active and working in 1000M mode.
Port Result Length
[meters]
Date
---- ------ --------------
-
----
g1 OK
g2 Short 50 13:32:00 23
July 2005
g3 Test has not been performed
g4 Open 64 13:32:00 23
July 2005
g5 Fiber - -
To Next Page
Loading...
