3Com 3CRUS2475 - Show Running-Config; Show Startup-Config

268 CHAPTER 16: CONFIGURATION AND IMAGE FILE COMMANDS
show
running-config
The show running-config Privileged EXEC mode command displays the
contents of the currently running configuration file.
Syntax
show running-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the contents of the running configuration
file.
show
startup-config
The show startup-config Privileged EXEC mode command displays the
contents of the startup configuration file.
Console# show running-config
hostname device
interface ethernet g1
ip address 176.242.100.100 255.255.255.0
duplex full
speed 1000
interface ethernet g2
ip address 176.243.100.100 255.255.255.0
duplex full
speed 1000