430 CHAPTER 30: SYSTEM MANAGEMENT COMMANDS
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information about the active users.
show sessions The show sessions Privileged EXEC mode command lists open Telnet
sessions.
Syntax
show sessions
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example lists open Telnet sessions.
Console#
show users
Username Protocol Location
---------- ----------- ------------
Bob Serial
John SSH 172.16.0.1
Robert HTTP 172.16.0.8
Betty Telnet 172.16.1.7
Console#
show sessions
To Next Page
Loading...
