490 CHAPTER 34: 802.1X COMMANDS
show dot1x
advanced
The show dot1x advanced Privileged EXEC mode command displays
802.1x advanced features for the device or specified interface.
Syntax
show dot1x advanced [ethernet interface]
Parameters
■ interface — Valid Ethernet port. (Full syntax: unit/port)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays 802.1x advanced features for the device.
Console# show dot1x advanced
Guest VLAN: 2
Unauthenticated VLANs: 91,92
Interface Multiple Hosts Guest VLAN
--------- -------------- ----------
g1 Disabled Enabled
g2 Enabled Disabled
Console#
show dot1x advanced ethernet
1
Guest VLAN: 2
Unauthenticated VLANs: 91,92
To Next Page
Loading...
