show bootvar 269
Syntax
show startup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the contents of the running configuration
file.
show bootvar The show bootvar Privileged EXEC mode command displays the active
system image file that is loaded by the device at startup.
Syntax
show bootvar Elana
Console#
show startup-config
hostname device
interface ethernet g1
ip address 176.242.100.100 255.255.255.0
duplex full
speed 1000
interface ethernet g2
ip address 176.243.100.100 255.255.255.0
duplex full
speed 1000
To Next Page
Loading...
