3Com 3CRUS2475 - Revision (Mst)

revision (mst) 225
Syntax
name string
Parameters
■ string — MST configuration name. The name is case-sensitive. (Range:
1-32 characters)
Default Configuration
The default name is the MAC address.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines the configuration name as region1.
revision (mst) The revision MST Configuration mode command defines the
configuration revision number. To restore the default configuration, use
the no form of this command.
Syntax
revision value
no revision
Parameters
■ value — Configuration revision number (Range: 0-65535).
Default Configuration
The default configuration revision number is 0.
Command Mode
MST Configuration mode
Console(config) # spanning-tree mst configuration
Console(config-mst) # name region1