show interfaces port-channel 115
■ auto — Allows the port to join a channel as a result of an LACP
operation.
Default Configuration
The port is not assigned to a port-channel.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example forces port 1 to join port-channel 1 without an
LACP operation.
show interfaces
port-channel
The show interfaces port-channel Privileged EXEC mode command
displays port-channel information.
Syntax
show interfaces port-channel [port-channel-number]
Parameters
■ port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
Console(config)#
interface ethernet g
1
Console(config-if)#
channel-group
1
mode on
To Next Page
Loading...
