3Com 3CRUS2475 - Show Snmp Groups

302 CHAPTER 19: SNMP COMMANDS
Example
The following example displays the configuration of views.
show snmp groups The show snmp groups Privileged EXEC mode command displays the
configuration of groups.
Syntax
show snmp groups [groupname]
Parameters
■ groupname—Specifies the name of the group. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration of views.
Console# show snmp views
Name OID Tree Type
----------- --------------------
---
---------
user-view 1.3.6.1.2.1.1 Included
user-view 1.3.6.1.2.1.1.7 Excluded
user-view 1.3.6.1.2.1.2.2.1.*.
1
Included
Console# show snmp groups
Name Security Views