3Com 3CRUS2475 - Show Snmp Users

304 CHAPTER 19: SNMP COMMANDS
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration of filters.
show snmp users The show snmp users Privileged EXEC mode command displays the
configuration of users.
Syntax
show snmp users [username]
Parameters
■ username—Specifies the name of the user. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Console# show snmp filters
Name OID Tree Type
----------- --------------------
---
---------
user-filter 1.3.6.1.2.1.1 Included
user-filter 1.3.6.1.2.1.1.7 Excluded
user-filter 1.3.6.1.2.1.2.2.1.*.
1
Included