3Com 3CRUS2475 - Qos Commands; Qos

9
QOS COMMANDS
qos The qos Global Configuration mode command enables quality of service
(QoS) on the device. To disable QoS on the device, use the no form of this
command.
Syntax
qos [basic | advanced ]
no qos
Parameters
■ basic — QoS basic mode.
■ advanced — QoS advanced mode, which enables the full range of
QoS configuration.
Default Configuration
The QoS basic mode is enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables QoS on the device.
Console(config)# qos basic