3Com 3CRUS2475 - Show Rmon History

172 CHAPTER 11: RMON COMMANDS
show rmon history The show rmon history Privileged EXEC mode command displays
RMON Ethernet history statistics.
Syntax
show rmon history index {throughput | errors | other} [period
seconds]
Parameters
■ index — Specifies the requested set of samples. (Range: 1-65535)
■ throughput — Indicates throughput counters.
■ errors — Indicates error counters.
■ other — Indicates drop and collision counters.
■ seconds — Specifies the period of time in seconds. (Range:
1-4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays RMON Ethernet history statistics for index
1.
Console# show rmon history 1 throughput
Sample Set: 1 Owner: CLI
Interface: g1 Interval: 1800
Requested samples:
50
Granted samples: 50
Maximum table size: 500