3Com 3CRUS2475 - Exit

438 CHAPTER 31: USER INTERFACE COMMANDS
exit (Configuration) The exit command exits any configuration mode to the next highest
mode in the CLI mode hierarchy.
Syntax
exit
Default Configuration
This command has no default configuration.
Command Mode
All configuration modes
User Guidelines
There are no user guidelines for this command.
Example
The following example changes the configuration mode from Interface
Configuration mode to Privileged EXEC mode.
exit The exit Privileged/User EXEC mode command closes an active terminal
session by logging off the device.
Syntax
exit
Default Configuration
This command has no default configuration.
Command Mode
Privileged and User EXEC modes
Console(config-if)# exit
Console(config)# exit
Console#