3Com 3CRUS2475 - Defining Rapid Spanning Tree

exit (mst) 227
exit (mst) The exit MST Configuration mode command exits the MST
Configuration mode, and applies all configuration changes.
Syntax
exit
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example exits the MST Configuration mode and saves
changes.
abort (mst) The abort MST Configuration mode command exits the MST
Configuration mode without applying the configuration changes.
Syntax
abort
Default Configuration
This command has no default configuration.
Instance Vlans Mapped State
-------- ------------ -------
0 1-9,21-4094 Enabled
1 10-20 Enabled
Console(config) # spanning-tree mst configuration
Console(config-mst) # exit
Console(config) #