3Com 3CRUS2475 - Show Gvrp Configuration

450 CHAPTER 32: GVRP COMMANDS
Example
The following example clears all GVRP statistical information on Ethernet
port g1.
show gvrp
configuration
The show gvrp configuration Privieged EXEC mode command displays
GVRP configuration information, including timer values, whether GVRP
and dynamic VLAN creation is enabled, and which ports are running
GVRP.
Syntax
show gvrp configuration [ethernet interface | port-channel
port-channel-number]
Parameters
■ interface — A valid Ethernet port. Elana
■ port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privieged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays GVRP configuration information.
Console# clear gvrp statistics ethernet g1
Console# show gvrp configuration
GVRP Feature is currently enabled on the device.
Timers (milliseconds)