3Com 3CRUS2475 - Show Interfaces Switchport

show interfaces switchport 467
Example
The following example displays VLANs used internally by the device.
show interfaces
switchport
The show interfaces switchport Privileged EXEC mode command
displays the switchport configuration.
Syntax
show interfaces switchport {ethernet interface | port-channel
port-channel-number}
Parameters
■ interface — A valid Ethernet port number.
■ port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Console# show vlan internal usage
Usage VLAN Reserved IP address
-------- ---- -------- ----------
14 50 Yes Inactive