3Com 3CRUS2475 - Show Bridge Multicast Filtering

72 CHAPTER 4: ADDRESS TABLE COMMANDS
show bridge
multicast filtering
The show bridge multicast filtering Privileged EXEC mode command
displays the multicast filtering configuration.
Syntax
show bridge multicast filtering vlan-id
Parameters
■ vlan-id — Indicates the VLAN ID. This has to be a valid VLAN ID value.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, the multicast configuration for VLAN 1 is displayed.
Console# show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Port Static Status
---- --------- ---------
g1 Filter
g2 Filter
g3 - Filter