3Com 3CRUS2475 - Crypto Certificate Generate

386 CHAPTER 26: WEB SERVER COMMANDS
Syntax
ip https port port-number
no ip https port
Parameters
■ port-number — Port number to be used by the HTTP server. (Range:
1-65535)
Default Configuration
The default port number is 443.
Command Mode
Global Configuration mode
User Guidelines
Specifying 0 as the port number effectively disables HTTP access to the
device.
Example
The following example configures the https port number to 100.
Console(config)# ip https port 100
crypto certificate
generate
The crypto certificate generate Global Configuration mode command
generates a self-signed HTTPS certificate.
Syntax
crypto certificate [number] generate [key-generate length] [cn
common- name] [ou organization-unit] [or organization] [loc location] [st
state] [cu country] [duration days]
Parameters
■ number — Specifies the certificate number. (Range: 1-2)
■ key-generate — Regenerate the SSL RSA key.
■ length — Specifies the SSL RSA key length. (Range: 512-2048)
Console(config)# ip https port 100