3Com 3CRUS2475 - Set Wlan Copy

set wlan copy 359
Syntax
wlan template ap configure name
Parameters
■ name — The name of the AP template. (Range: 1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
All AP configuration commands are relevant to template APs, except for
the name AP configuration command and wlan ap key Global
Configuration commands.
Example
The following example places the device in wireless AP template
configuration mode to configure template called ‘type1’.
set wlan copy The set wlan copy wireless AP template configuration command copies
the wireless AP configuration parameters from the template AP to an AP.
Syntax
set wlan copy ap {default | template-name} to ap ap-name
set wlan copy ap ap-name to template ap {template-name}
Parameters
■ default — The default template.
■ template-name — The template AP name. (Range: 1 – 32 characters)
■ ap-name — The AP name. (Range: 1 – 32 characters)
Console (Config)# wlan template ap configure type1
Console (Config-wlan-template-ap)#