428 CHAPTER 30: SYSTEM MANAGEMENT COMMANDS
Default Configuration
The default connection number is that of the most recent connection.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following command switches to open Telnet session number 1.
reload The reload Privileged EXEC mode command reloads the operating
system.
Syntax
reload
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Caution should be exercised when resetting the device, to ensure that no
other activity is being performed. In particular, the user should verify that
no configuration files are being downloaded at the time of reset.
Example
The following example reloads the operating system.
Console> resume 1
Console# reload
This command will reset the whole system and disconnect your
current session. Do you want to continue (y/n) [n]?
To Next Page
Loading...
