3Com 3CRUS2475 - Show Cpu Utilization

434 CHAPTER 30: SYSTEM MANAGEMENT COMMANDS
show cpu
utilization
The show cpu utilization Privileged EXEC mode command displays
information about CPU utilization.
Syntax
show cpu utilization
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Use the service cpu-utilization Global Configuration mode command to
enable measuring CPU utilization.
Example
The following example configures the CPU utilization information display.
Console# show cpu utilization
CPU utilization service is on.
CPU utilization
--------------------------------------------------
five seconds: 5%; one minute: 3%; five minutes: 3%