3Com 3CRUS2475 - Show Wlan Aps Discovered

368 CHAPTER 24: WIRELESS AP GENERAL COMMANDS
show wlan aps
discovered
The show wlan aps discovered Privileged EXEC mode command
displays wireless APs that were discovered but not activated.
Syntax
show wlan aps discovered [mac-address]
Parameters
■ mac-address — MAC address of the AP.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
Console# show wlan aps counters ap AP1
Number of stations: 19
In Octets: 756857
In Packets: 8691
In Unicast Packets: 8432
In Data Packets: 8533
In Management Packets: 158
In Errors: 2
Out Octets: 87398238
Out Packets: 922982
Out Unicast Packets: 811871
Out Data Packets: 881831
Out Management Packets: 41151
Out Errors: 0