3Com 3CRUS2475 - Traffic-Shape

134 CHAPTER 9: QOS COMMANDS
Command Mode
Global Configuration mode
User Guidelines
Configuring the number of expedite queues affects the Weighted Round
Robin (WRR) weight ratio because fewer queues participate in the WRR.
Example
The following example configures the number of expedite queues as 0.
traffic-shape The traffic-shape Interface Configuration (Ethernet, port-channel) mode
command configures the shaper of the egress port/queue. To disable the
shaper, use the no form of this command.
Syntax
traffic-shape {committed-rate committed-burst}
no traffic-shape
Parameters
■ committed-rate — Specifies the average traffic rate (CIR) in kilobits per
second (kbps).
■ (Range: 64 kbps-1000000)
■ excess-burst — Specifies the excess burst size (CBS) in bytes.
Default Configuration
No shape is defined.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
This command activates the shaper on a specified egress port or egress
queue.
Console(config)# priority-queue out num-of-queues 0