3Com 3CRUS2475 - Radius-Server Retransmit

radius-server retransmit 273
Syntax
radius-server key [key-string]
no radius-server key
Parameters
■ key-string — Specifies the authentication and encryption key for all
RADIUS communications between the device and the RADIUS server.
This key must match the encryption used on the RADIUS daemon.
(Range: 0-128 characters)
Default Configuration
The key-string is an empty string.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines the authentication and encryption key for
all RADIUS communications between the device and the RADIUS
daemon.
radius-server
retransmit
The radius-server retransmit Global Configuration mode command
specifies the number of times the software searches the list of RADIUS
server hosts. To reset the default configuration, use the no form of this
command.
Syntax
radius-server retransmit retries
no radius-server retransmit
Parameters
■ retries — Specifies the retransmit value. (Range: 1-10)
Console(config)# radius-server key enterprise-server