3Com 3CRUS2475 - Wireless Rogue Ap Commands; Rogue-Detect Enable (Radio)

22
WIRELESS ROGUE AP
COMMANDS
rogue-detect
enable (Radio)
The rogue-detect enable AP Interface Radio Configuration mode
command enables detection of rogue APs. To disable rouge APs
detection, use the no form of this command.
Syntax
rogue-detect enable
no rogue-detect enable
Parameters
This command has no keywords or arguments.
Default Configuration
Rogue detection is disabled.
Command Mode
AP Interface Radio Configuration mode
User Guidelines
Use the rogue-detect enable Global Configuration command to
globally enable/disable rogue detection. Rouge detection can be enabled
on a specific AP only if rogue detection is enabled globally and for the AP.