3Com 3CRUS2475 - Clear Logging

clear logging 405
Default Configuration
The default number of messages is 200.
Command Mode
Global Configuration mode
User Guidelines
This command takes effect only after Reset.
Example
The following example changes the number of syslog messages stored in
the internal buffer to 300.
clear logging The clear logging Privileged EXEC mode command clears messages from
the internal logging buffer.
Syntax
clear logging
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example clears messages from the internal logging buffer.
Console(config)# logging buffered size 300
Console# clear logging
Clear Logging File [y/n]