3Com 3CRUS2475 - Dot1 X System-Auth-Control; Dot1 X Port-Control

470 CHAPTER 34: 802.1X COMMANDS
Example
The following example uses the aaa authentication dot1x default
command with no authentication.
dot1x
system-auth-contro
l
The dot1x system-auth-control Global Configuration mode command
enables 802.1x globally. To restore the default configuration, use the no
form of this command.
Syntax
dot1x system-auth-control
no dot1x system-auth-control
Default Configuration
802.1x is disabled globally.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables 802.1x globally.
dot1x port-control The dot1x port-control Interface Configuration mode command
enables manually controlling the authorization state of the port. To
restore the default configuration, use the no form of this command.
Syntax
dot1x port-control {auto | force-authorized | force-unauthorized}
no dot1x port-control
Console# configure
Console(config)# aaa authentication dot1x default none
Console(config)# dot1x system-auth-control