show logging 409
no management logging deny
Parameters
■ deny — Indicates logging messages related to deny actions of
management ACLs.
Default Configuration
Logging management ACL events is enabled.
Command Mode
Global Configuration mode
User Guidelines
Other types of management ACL events are not subject to this command.
Example
The following example enables logging messages related to deny actions
of management ACLs.
show logging The show logging Privileged EXEC mode command displays the state of
logging and the syslog messages stored in the internal buffer.
Syntax
show logging
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
Console(config)#
management logging deny
To Next Page
Loading...
