154 CHAPTER 10: CLOCK COMMANDS
■ value — Key value (Range: 1-8 characters)
Default Configuration
No authentication key is defined.
Command Mode
Global Configuration mode
User Guidelines
Multiple keys can be generated.
Example
The following example defines the authentication key for SNTP.
sntp authenticate The sntp authenticate Global Configuration mode command grants
authentication for received Simple Network Time Protocol (SNTP) traffic
from servers. To disable the feature, use the no form of this command.
Syntax
sntp authenticate
no sntp authenticate
Default Configuration
No authentication
Command Mode
Global Configuration mode
User Guidelines
The command is relevant for both unicast and broadcast.
Console(config)#
sntp authentication-key
8
md5
ClkKey
To Next Page
Loading...
