3Com 3CRUS2475 - File-System Logging; Management Logging

408 CHAPTER 28: SYSLOG COMMANDS
file-system logging The file-system logging Global Configuration mode command enables
logging file system events. To disable logging file system events, use the
no form of this command.
Syntax
file-system logging copy
no file-system logging copy
file-system logging delete-rename
no file-system logging delete-rename
Parameters
■ copy — Indicates logging messages related to file copy operations.
■ delete-rename — Indicates logging messages related to file deletion
and renaming operations.
Default Configuration
Logging file system events is enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables logging messages related to file copy
operations.
management
logging
The management logging Global Configuration command enables
logging management access list (ACL) events. To disable logging
management access list events, use the no form of this command.
Syntax
management logging deny
Console(config)# file-system logging copy