show system 431
The following table describes significant fields shown above.
show system The show system Privileged EXEC mode command displays system
information.
Syntax
show system
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the system information.
Connection Host Address Port Byte
---------- -----------
--
---------- ----- ----
1 Remote
device
172.16.1.1 23 89
2 172.16.1.2 172.16.1.2 23 8
Field Description
Connection Connection number.
Host Remote host to which the device is
connected through a Telnet session.
Address IP address of the remote host.
Port Telnet TCP port number
Byte Number of unread bytes for the user to
see on the connection.
Console# show system
System Description: Ethernet Switch
To Next Page
Loading...
