456 CHAPTER 33: VLAN COMMANDS
Parameters
■ vlan-range — Specifies a list of VLAN IDs to be added. Separate
nonconsecutive VLAN IDs with a comma and no spaces; a hyphen
designates a range of IDs. (Range: 2-4094)
Default Configuration
This command has no default configuration.
Command Mode
VLAN Database mode
User Guidelines
There are no user guidelines for this command.
Example
The following example VLAN number 1972 is created.
interface vlan The interface vlan Global Configuration mode command enters the
Interface Configuration (VLAN) mode.
Syntax
interface vlan vlan-id
Parameters
■ vlan-id — Specifies an existing VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Console(config)# vlan database
Console(config-vlan)# vlan 1972
To Next Page
Loading...
