3Com 3CRUS2475 - Port Security Routed Secure-Address

port security routed secure-address 65
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, port security mode is set to dynamic for Ethernet
interface g7.
port security routed
secure-address
The port security routed secure-address Interface Configuration
(Ethernet, port-channel) mode command adds a MAC-layer secure
address to a routed port. Use the no form of this command to delete a
MAC address.
Syntax
port security routed secure-address mac-address
no port security routed secure-address mac-address
Parameters
■ mac-address — A valid MAC address.
Default Configuration
No addresses are defined.
Command Mode
Interface Configuration (Ethernet, port-channel) mode. Cannot be
configured for a range of interfaces (range context).
User Guidelines
Console(config)# interface ethernet g7
Console(config-if)#
port security mode mac-addresses