3Com 3CRUS2475 - Configuring Address Tables

198 CHAPTER 13: LACP COMMANDS
show lacp
port-channel
The show lacp port-channel Privileged EXEC mode command displays
LACP information for a port-channel.
Syntax
show lacp port-channel [port_channel_number]
Parameters
■ port_channel_number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays LACP information about port-channel 1.
Port_moved: FALSE
NNT: FALSE
Port_enabled: FALSE
Timer counters:
periodic tx
timer:
0
current while
timer:
0
wait while
timer:
0
Console# show lacp port-channel 1
Port-Channel ch1