3Com 3CRUS2475 - 10 Configuring Mulitcast Forwarding

204 CHAPTER 14: POWER OVER ETHERNET COMMANDS
Global Configuration mode
User Guidelines
There are no user guidelines for this command. Example
The following example configures the threshold for initiating inline power
usage alarms to 90 percent.
power inline traps
enable
The power inline traps enable Global Configuration mode command
enable inline power traps. Use the no form of this command to disable
traps.
Syntax
power inline traps enable
no power inline traps enable
Parameters
This command has no arguments or keywords.
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables inline power traps.
show power inline The show power inline Privileged EXEC mode command displays
information about the inline power.
Console(config)# power inline usage-threshold 90
Console(config)# power inline traps enable