3Com 3CRUS2475 - Show Interfaces Counters

show interfaces counters 91
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays descriptions of configured interfaces.
show interfaces
counters
The show interfaces counters Privileged EXEC mode command displays
traffic seen by the physical interface.
Syntax
show interfaces counters [ethernet interface | port-channel
port-channel-number]
Parameters
■ interface — A valid Ethernet port. Elana
■ port-channel-number — A valid port-channel number.
Console# show interfaces description
Port Description
---- -----------
g1 lab
g2
g3
g4
g5
g6
ch1
ch2