3Com 3CRUS2475 - Show Snmp Views

show snmp views 301
Syntax
show snmp engineID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SNMP engine ID.
show snmp views The show snmp views Privileged EXEC mode command displays the
configuration of views.
Syntax
show snmp views [viewname]
Parameters
■
■ viewname — Specifies the name of the view. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Console# show snmp engineID
Local SNMP engineID: 08009009020C0B099C075878