3Com 3CRUS2475 - Wireless Wlan Commands; Wlan Tx-Power off

36
WIRELESS WLAN COMMANDS
wlan tx-power off The wlan tx-power off Global Configuration mode command turns off
all APs transmitters. To enable transmit Power, use the no form of this
command.
Syntax
wlan tx-power off
no wlan tx-power off
Parameters
This command has no keywords or arguments.
Default Configuration
Auto
Command Mode
Global Configuration mode
User Guidelines
Use the enable AP interface radio configuration command to
enable/disable TX power of specific AP.
TX power is enabled on a specific AP only if TX power is enabled globally
and for the AP.
Example
The following example turns off all AP transmitters.
Console (config)# wlan tx-power off